Analysis of problems existing in the traditional treatment of coal-bearing wastewater in power plants

First of all, it is easy to cause blockage in the water conveyance system. In most power plants, coal-bearing wastewater is mainly collected in the sump between the coal bunkers.

2023-01-16

read more

What are the main applications of PDMDAAC?

As a water treatment agent, PDMDAAC is involved in almost all fields of industrial wastewater, domestic sewage and drinking water treatment; it is used as a clay stabilizer, mud treatment agent, and oily wastewater treatment agent in the oil mining industry; in the daily chemical industry as an antistatic agent, Moisturizers, emollients, etc.

2022-07-22

read more

What is organic pollution and inorganic pollution of water bodies?

Organic pollution of water bodies: mainly refers to the pollution caused by the discharge of wastewater containing a large amount of organic matter from urban sewage, food industry and paper industry. Inorganic pollution of water bodies: refers to acids, alkalis and inorganic.

2022-05-28

read more

Explanation of terms related to water pollution

Chemical oxygen demand (COD) refers to the oxygen content required by organisms in a certain volume of water, and ammonia nitrogen (NH3-N) refers to the nitrogen in the water in the form of free ammonia (NH3) and ammonium ions (NH4).

2022-05-02

read more

How to treat oily wastewater?

The treatment of oily wastewater should first use the oil separator to recover floating oil or heavy oil. The treatment efficiency is 60%-80%, and the oil content in the effluent is about 100-200 mg/L. Emulsified oil and dispersed oil in wastewater are difficult to handle, and emulsification should be prevented or reduced.

2022-04-26

read more

What is the primary treatment and secondary treatment of sewage?

The primary treatment of sewage is the physical treatment of sewage, which is the first stage in the sewage treatment level. Secondary treatment of sewage is the purification process of colloidal and dissolved organic matter in sewage after primary treatment of sewage, and biological method and flocculation method are commonly used.

2022-04-21

read more

Water treatment plant sludge classification and properties?

The sludge in the water purification plant is composed of the backwash drainage from the filter tank and the solids in the sludge drainage from the sedimentation tank or clarifier. Sewage plant sludge is a sedimentary material produced during wastewater treatment.

2022-04-17

read more

What are the main technologies for sludge treatment and disposal in sewage treatment plants?

Sludge treatment and disposal technologies in sewage treatment plants mainly include: concentration and dehydration technology, anaerobic digestion technology, aerobic fermentation technology, sludge thermal drying technology, lime stabilization technology, and sludge pyrolysis treatment technology.

2022-04-15

read more

Introduction of printing and dyeing wastewater treatment technologies

At present, the main treatment methods of printing and dyeing wastewater include three categories: physical chemical treatment, chemical treatment and biological treatment. The following will analyze the application of various treatment technologies in the treatment of printing and dyeing wastewater.

2022-04-14

read more

Dissolved air flotation (DAF) process

Dissolved air flotation process (DAF process) is an efficient and fast method for separating solid particles from water and wastewater.

2022-04-12

read more

What is activated sludge and activated sludge treatment method?

Activated sludge is a general term for microbial populations and the organic and inorganic substances to which they are attached. Activated sludge treatment method is a sewage treatment process.

2022-04-11

read more

Industrial fluorine-containing wastewater treatment method

At present, the precipitation method is the most important fluorine-containing wastewater treatment method. Among them, the precipitation method can be divided into chemical precipitation method and coagulation precipitation method.

2022-04-10

read more

What is the Difference Between Flocculation and Coagulation?

Coagulation = coagulation + flocculation, usually the agents that play the role of coagulation and flocculation are collectively referred to as coagulants. So I think as long as you understand the two concepts of coagulation and flocculation, you can distinguish coagulation and flocculation.

2022-04-09

read more

What are water pollutants?

Water pollutants refer to substances that can change the physical and chemical properties of the water body, cause the water body to deteriorate, and affect the changes in the biological community structure or biological community composition.

2022-04-08

read more

What are the waste paper papermaking wastewater treatment technologies?

Since the wastewater formed by the waste paper and papermaking process contains many pollutants, it is necessary to treat the wastewater in the process of wastewater formation and discharge. This article will specifically analyze the wastewater treatment technology in the waste paper and papermaking process.

2022-04-07

read more

Pollution characteristics of waste paper papermaking wastewater

Waste paper making generally uses waste cardboard, waste newspapers, etc. as the main reproducing raw materials, which are used to produce whiteboard paper or cardboard paper and other products.

2022-04-02

read more

What are the emergency treatment technologies for sudden water pollution?

The methods of dealing with sudden organic pollutants mainly include physical and chemical methods such as adsorption and oxidative decomposition.

2022-04-01

read more

Selection of optimal treatment methods for oil production wastewater

Generally, wastewater treatment methods include physical, chemical, physical-chemical and biological methods.The above several oil extraction wastewater treatment methods have their own advantages in technology and economy.

2022-03-26

read more

Status Quo and Problems of Oil Production Wastewater Treatment

The main components of the wastewater produced in the process of oil production in the oil field are crude oil and a small amount of organic substances as oil production aids. The conventional oil production wastewater treatment process in the oil field is basically three steps of "oil separation - flotation - filtration".

2022-03-24

read more

What are the common water pollution sources and pollutants?

The sources and places that discharge or release pollutants into water are called water pollution sources, which are the main culprits of water pollution. Water pollution sources can be classified from different angles.

2022-03-21

read more

Products Contact About us